KOBELION VS series main
KOBELION VS series sub1
KOBELION VS series sub2
KOBELION VS series sub3
KOBELION VS series main
KOBELION VS series sub1
KOBELION VS series sub2
KOBELION VS series sub3

Ultimate Efficient Inverter Model.

Summit of high-tech for extreme efficiency.Premium energy saver with industrial top notch Air-End, super premium efficiency (IE4 equiv) IPM motor, built-in overhung design.Much wider range, much better usability.

Motor output : 22-75kW
Discharge air flow : 3.8-15.2m 3/min
Features

Energy efficiency with Inverter control

KOBELION VS can adjust compressor's rotating speed depends on the demand of factory load which changes from moment to moment by own developed algorithm.Thus, it can provide exact volume and pressure what customer needs and achieve maximum energy saving.

BUILT-IN OVER HUNG DESIGN

High efficiency

Motor rotor is directly mounted on the rotor shaft.No coupling, no belt and no gear design realize zero transmission loss.

Easy maintenance

With built in overhung design, adjusting and replacing of v-belt is no longer necessary.It is not even required to change or re-grease motor bearings.

BUILT-IN OVER HUNG DESIGN

Super Premium Efficiency IPM Motor (IE4 equiv)

New KOBELION VS series equips super premium efficiency IPM (interior permanent magnet) motor, which efficiency is equivalent to IE4 of IEC standard.IPM has better efficiency from low load to high load compare to induction motor.This IPM is with oil cooled jacket cooling system with insulation class H, which has better resistance to high ambient conditions.

New Wide Range Control

Wide Range Control of KOBELION VS can deliver much higher flow when it runs at lower pressure point.KOBELION VS senses line pressure and automatically change maximum rpm limit.New KOBELION VS achieves much higher flow and much wider pressure range.As a leading company of Inverter compressor, we can offer cutting-edge value.

New Wide Range Control

Up to 50℃ ambience

Designed with enough margin against temperature, continuous duty up to 45℃, can be operated up to 50℃.

Full color touch monitor

Newly developed "NGSC-430/700" is sophisticated LCD interface which enables you to figure out necessary information at a glance.

Specification

VS series (Inverter model / Air cooled )

Model Discharge pressure Discharge air flow Nominal output Pipe connection Fan motor output Lube Oil Quantity Noise level Dimensions
(W x D x H)
Weight
MPa m3/min kW A kW L dB(A) mm kg
VS22AⅣ 0.4 ~ 0.85
( 0.7 )
4.75 ~ 3.82
( 4.25 )
22 25 0.65 12
[ 13 ]
55 1,250 × 850 × 1,500 550
VS37AⅣ 7.7 ~ 6.4
( 7.1 )
37 40 1.1 19
[ 21 ]
58 1,550 × 950 × 1,600 710
VS55AⅣ 11.8 ~ 9.8
( 10.6 )
55 50 1.5 32
[ 40 ]
63 2,200 × 1,200 × 1,700 1,350
VS75AⅣ 15.2 ~ 13.0
( 14.0 )
75 50 3.0 32
[ 40 ]
65 2,200 × 1,200 × 1,700 1,430

VS series (Inverter model / Water cooled )

Model Discharge pressure Discharge air  ow Nominal output Pipe connection Cooling Water Lube Oil Quantity Noise level Dimensions Weight
Water volume Pipe connection W×D×H
MPa m3/min kW A L/min A L dB(A) mm kg
VS37WⅣ 0.4 ~ 0.85
( 0.7 )
7.7 ~ 6.4
( 7.1 )
37 40 65 25 13
[ 14 ]
58 1,550 × 950 × 1,600 690
VS55WⅣ 11.8 ~ 9.8
( 10.6 )
55 50 95 40 26
[ 28 ]
63 2,200 × 1,200 × 1,700 1,280
VS75WⅣ 15.2 ~ 13.0
( 14.0 )
75 50 125 40 30
[ 32 ]
65 2,200 × 1,200 × 1,700 1,330

Main motor: 6 pole, Synchronous IPM motor, Oil cooled, Class H, Inverter drive
Electrical spec : Three-phases, 200/200・220V (380・400・415/400・440V)
Constant pressure setting can be 0.85 MPa at maximum

[ ] for initial charge