kobelionvs-large
kobelionvs-large_l
kobelionvs-large_r
kobelionvs-large
kobelionvs-large_l
kobelionvs-large_r
Motor output : 110 - 160kW
Discharge air flow : 19 - 34.9 m 3/min
Features

Powered by Cutting-Edge High-Efficiency Air-End

New generation air-end, delivering significant efficiency improvement compared to previous model.Direct-Gear-Drive design eliminates maintenance of coupling and v-belt, ensuring seamless integration of the powertrain.Experience enhanced reliability and extended maintenance intervals.

Powered by Cutting-Edge High-Efficiency Air-End

Super premium IE4 motor as standard

Super premium IE4 motor as standard
Equipped with industry-leading IE4 motors across all models, achieving top-class efficiency.The utilization of dimensionally stabilized bearings enhances reliability under high-load conditions.

Improvement in Specific Energy ~Reduced up to 15%~

By incorporating a newly developed air-end and ultra-high-efficiency motor, combined with a sleek package design, New KOBELION series have achieved improvement in specific energy efficiency.That realizes significant saving in electricity and reduction of CO₂ emissions, promoting a greener and more sustainable future.

Wide range Control [VS⁺]

KOBELCO's wide range control, a pioneer in low-pressure increased airflow control for inverter machines, is also applied to large oil-injected models.A single model provides optimal variable speed control at all pressure points to optimize the user's energy -saving benefits.

Improvement in Specific Energy ~Reduced up to 15%~

Enhanced Environmental Durability

Enhanced Environmental Durability
Standard equipped dust filter elevates the environmental performance against dust and firth.Optimized cooling system enables to run even up to 50℃ ambient temperature.

Exquisite Package Design

Exquisite Package Design_1
The adoption of spacious air piping and Victaulic joins reduces vibration and contributes to low pressure losses in the discharge air lines.The oil separation performance its industry- leading standard of 1.6ppm and less.
Exquisite Package Design_2

NGSC-700 controller as standard

NGSC-700 controller as standard
  • Operating condition

  • Maintenance schedule

  • Alarm/Interlock list

  • Alarm/Trip history

  • Compressor settings

  • Flow diagram

  • Daily, Weekly, Monthly record
    etc.

Compressor Group Control

Up to 6 units of compressor can be control by inbuilt sequencing function without external control panel.(Hard wire connections are needed)

Compressor Group Control
Specification

VS⁺ seriese (performance line) 【Inverter model/ [A]:Air coled [W]:Water cooled】

VS⁺ seriese (performance line) 【Inverter model/ [A]:Air coled [W]:Water cooled】

Main motor:4-poel, TEFC Induction motor, IE4, Class F, Inverter drive Electrical spec:380/415V-50Hz

The maximum pressure for constant pressure control is up to 1.05MPa.( )for water cooled model

AG⁺ seriese (performance line) 【IFixed speed model/ [A]:Air coled [W]:Water cooled】

AG⁺ seriese (performance line) 【IFixed speed model/ [A]:Air coled [W]:Water cooled】

Main motor:4-poel, TEFC Induction motor, IE4, Class F, Star-delta drive Electrical spec:380/415V-50Hz

( )for water cooled model